Motorcycle kits include (1) bulb and (1) ballast and all of the necessary hardware needed to install your kit
High/Low kits use (2) bulbs and (2) ballast and have a relay that controls the moving bulb. Giving you the effect of having a high and a low beam, by changing the beam pattern from a wider to a more focused beam, however the brightness does not change.
Already know what size you need? if your ready to check out, choose you size and temp temperature from the many below and it will guide you to the checkout through Paypal. Not sure what size you need? visit the
fitaments
tap at the top of the page and scroll to the manufacture of your car or send us an email at
sales@hidextreme.com
 |
Most credit cards can be processed through Paypal if you do not have a Paypal account you can set one up with the link below. We also accept cashiers checks and money orders. no orders can be shipped until they clear.
Find your Car Truck or Motorcycle on our fitment guide to the left.
HID Extreme Replacement bulbs will work on most aftermarket HID Conversion kits. The Bulbs listed will not work without a Ballast and the proper harness. As with most bulbs touching the bulb during installation can result in the lamp failing prematurely.
|
||
Relay A: The function of this relay is to solve error messages on the cars computer, avoid radio interference and bulb flickering. These problems occur on most high end vehicles including Audi, BMW, Mercedes, and late model Dodge Products. Most models will require this relay. Relays are sold in sets only.
Click picture to enlarge
Click picture to enlarge
Click picture to enlarge
Relay B: The function of this relay is to solve voltage problems when the HID conversion kit lights up. This Relay is only for Volkswagen products. This realy set will be required when purchasing any aftermarket Xenon light kit. This Relay kit is sold in pairs only.
Click picture to enlarge
Relay C: The function of this relay is to solve voltage problems when the vehicle that the HID conversion kit is being installed on uses the headlights as daytime running lights and decreaseing the voltage to the ballast causing the light to flicker.This relay is sold as one piece.
Click picture to enlarge
Relay D: The function of this relay is to solve the headlight out warning that happens on Land Rover, Range Rover and other vehicles that have a lamp out warning on the dash. These relays are sold in pairs only.
Click picture to enlarge
Switch Relay: The function of this relay is to solve the polarity issues with some vehicles using the high/low kit. This relay will allow the lows to be lows and the highs to remain the highs according to the vehicles settings. F series Fords 97-05 will require this pair when using a High/Low Xenon Kit. Sold as a Pair
Click picture to enlarge
Click picture to enlarge
Bulb Adaptors: the E39-2 Adaptor is to plug the aftermarket bulb into the O.E.M. light housing. This adaptor is for the BMW 525i and the older 3 series models. A ll adaptors are sold in pairs.
Bulb Adaptors: the E39-1 Adaptor is to plug the aftermarket bulb into the O.E.M. light housing. This adaptor is for the BMW 520/530 Models A ll adaptors are sold in pairs.
Click picture to enlarge
Bulb Adaptors: the E46 Adaptor is to plug the aftermarket bulb into the O.E.M. light housing. This adaptor is for the BMW 3 series models from 1998-2007. A ll adaptors are sold in pairs.
